Benefits
Style Number
TGL82
TGL84
TGL83
TGN22
TGL85
TGN92*
Construction
ceramic
ceramic
porcelain
ceramic
porcelain
porcelain
Tile Type
wall
wall
bullnose
bullnose
mosaic
hexagon mosaic
Tile Size
3" x 6"
4" x 16"
3" x 6"
4" x 16"
12" x 12" x 2"
10" x 12" x 1"
Style Number
TGN93*
TGN94*
TGN95*
TGN96
TGN97
TGN98
TGN99
Construction
porcelain
porcelain
porcelain
porcelain
porcelain
porcelain
porcelain
Tile Type
2x2 mosaic
with dot
pinwheel
mosaic
basketweave
mosaic
penny
round
mini brick
lantern
beveled
diamond mosaic
Tile Size
12" x 12" x 2"
12" x 12"
12" x 12"
12" x 12"
11.5" x 11"
10" x 11.5"
10" x 13"
Colors
200 Linen
200 Linen
101 Biscuit
101 Biscuit
550 Taupe
550 Taupe
100 White
100 White
500 Warm Grey
500 Warm Grey
TGL85 mosaic 12" x 12" x 2" sheet
The basis of a beautiful kitchen! This collection starts with the classic 3" x 6" wall tile and adds an exciting new size and
shape - 4" x 16" - for an elegant, modern look. Mosaics and coordinating bullnose round out the series.
· Wall Tile
Porcelain with glossy finish
Perfect for kitchen backsplashes and shower walls
· Matte Mosaics
Porcelain: Suitable for floors
and walls
· Gloss Mosaics
Porcelain: Suitable for walls
· Bullnose
Porcelain with glossy finish
TGL83
buLLnose
musT
be
used
wiTh
3"
x
6"
waLL
TiLe
TGn22
buLLnose
musT
be
used
wiTh
4"
x
16"
waLL
TiLe
*suitable for floors
A DCOF value of > 0.42 is the new standard for tiles specified for commercial application in standard A137.1-2012, Section 9.6. It replaces the SCOF value of
> 0.60 referenced in ASTM C1028. For more information on the correlation between the two values and about the DCOF AcuTest visit the Tile Council of
North America's website:
www.tcnatile.com
MANUFACTURER'S WARNING:
- Tiles with DCOF Acutest values less than .42 are not recommended for use in areas with wet or slippery conditions. If such tiles are used as a walking
surface where water, ice, oil, great and/or other substances are present, such a condition could cause a reduction in foot traction and become unexpectedly
slippery resulting in a fall and personal injury. See ANSI standard A137.1 section 6.2.2.1.10, available at www.tcnatile.com/sections6.2.2.1.10.html.
- Water, oil, grease, etc. create slippery conditions. Floor applications with exposure to these conditions require extra caution in product selection. Not for
use on ramps.
- For additional information, refer to Factors to Consider.
- Since there is a shade variation on all natural products, the tile and trim supplied for your particular installation may not match these samples. Final
selection should be made from actual tiles and trim and not from tile and trim samples or color reproductions. Manufactured in accordance with ANSI
A137.1 standards.